What is the difference between a corrugated washer and a regular washer?

location:Home / NEWS / What is the difference between a corrugated washer and a regular washer?

What is the difference between a corrugated washer and a regular washer?

date:[2022-01-03]     pk_hits:
波形墊圈是彈簧墊圈的一種,與平墊圈是不一樣的,所以我們在使用中要注意區分波形墊圈和平墊圈。不然在使用中可能會給我們帶來不必要的麻煩。

波形墊圈與普通墊圈的區別:


普通彈簧墊圈的彈性比較大,靠其較大的彈力及其斜口的卡死摩知擦力防松,防松效果明顯、可靠。用于通道常的機械結構的防松場合。波形彈簧墊圈靠其彈性變形壓緊被連接件而防松,波形墊圈彈力較小,受力均勻,不損壞被連接件的表面。通常專用于一般的防松屬要求的場合。例如,理發推剪兩個刀片的鏈接防松就用這種墊圈。

波形墊圈的概述:


一般波形墊圈的厚度都在0.5 ~ 2mm之間由65Mn或不銹鋼等其它具有彈性特點的材料制成。在上料機構中,為了讓波形墊圈在一定的時間間隔內,每次提供相等數量的波形墊圈到拾取位置在設計中選用了步進電機的傳動方式來完成上料過程。

波形墊圈重量一般在幾克左右因此較小型號的真空發生器便能將其吸起但這里,筆者建議使用稍大型號的真空發生器。由于波形墊圈可接觸面積較小一般在直徑2-3毫米左右此規格的吸盤通氣量較小,吸點又不是平面產生的吸力就會很小在移載過程因振動等原因會造成其掉落現象選擇較大型號真空發生器即使有一個吸盤發生作用也會使其吸起不致脫落。也因?yàn)榇嗽蛟谝戚d墊圈過程監測時單獨采用光纖等方式而不采用真空發生器開關。
Rui'an Leichi Automotive Parts Co., Ltd

All product images and promotional images on this website belong to us and are not allowed to be used by any individual or organization. Misappropriation is subject to investigation.

Rui'an Leichi Automotive Parts Co., Ltd

Tel:0577-66003961Fax:0577-66003962Phone:13968888163 E-mail:8892@163.comAdd:zhejiang ruian pond town Lin industrial zone

WeChat

National Service Hotline

13968888163

We warmly welcome your consultation and will provide you with satisfactory solutions for automotive parts